Unpacking; Assembling - Optika Italy IM Serie Manual De Instrucciones

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.

Assembling

Once you open the box, these are the microscope's components:
⑤
① Microscope body
② Condenser
③ LED illuminator
④ Fluorescence power supply
⑤ Power cables
⑥ Filter holder
⑦ Metal insert for stage
⑧ Glass insert for stage
④
②
③
⑥
⑦
①
⑨
⑩
⑪
⑧
⑨ Objectives
⑩ Eyepieces
⑪ Fluorescence filters
⑫ Brightfield filters (IF550)
⑬ Orange screen
⑭ Diaphragm assembly
⑮ Mercury lamp house
Page 5
⑮
⑬ ⑭
⑫