Optika Italy IM Serie Manual De Instrucciones página 9

• Insert the filter holder into its slot near the
lamp house. (Fig.16)
• Unscrew the protection cover on the left
side of the microscope, with the provided
allen wrench. (Fig.17)
• Slide the green filter inside the dovetail
guide, after screwing the filter lever into the
threaded hole of the filter. Mount the pro-
tection cover back in its position. (Fig.18)
• On top of the filter lever, screw the terminal
with the etched G. Repeat the same steps
for the right side, mounting the Blue filter-
set. (Fig.19)
• For preventing possible damages from
UV radiation, mount the orange protection
screen as shown. (Fig.20)
Page 9
Fig.16
Fig.17
Fig.18
Fig.19
Fig.20