About This Documentation; Conventions Used - Lenze L-force 9400 Guía Para La Puesta En Marcha

9400 HighLine | Commissioning guide

About this documentation

Conventions used

1 About this documentation
This documentation is a guide for (initial) commissioning 9400 HighLine controllers. It
complements the mounting instructions supplied with the controller, the hardware
manual, and the software manual for the controller.
Target group
This documentation is intended for qualified staff according to IEC 364.
Information on validity
The information in this documentation is valid for the following standard devices:
Product range
9400 Servo Drives
Document history
Material number
13237623
13265003
13279365
13328367
1.1 Conventions used
This documentation uses the following conventions to distinguish between different types
of information:
Type of information
Spelling of numbers
Decimal separator
Text
Program name
Window
Control element
24
Type designation From software version
E94AxHExxxx 4.0
Version Description
1.0 02/2008 TD05 First edition for 9400 HighLine V03
2.0 09/2008 TD05 Updated edition for 9400 HighLine V04 and
9400 StateLine V04
3.0 11/2008 TD05 New edition due to reorganisation of the company
4.0 02/2010 TD03 Updated edition for 9400 HighLine
Writing Examples/notes
Point Generally, the decimal point is used.
For example: 1234.56
» « The Lenze PC software »Engineer«...
Italics The Message window... / The Options dialog box...
Bold The OK... button / The Copy... command / The
Properties...tab
L
EDB94AXX6954 DE/EN/FR/ES/IT 4.0