Peavey CA-A540B Manual Del Usuario página 31

Characteristics:
Output Power 1, 2, 3:
2 Channel Mode, Stereo
4 ohms, 1 kHz at 1% THD
8 ohms, 1 kHz at 1% THD
Bridge Mode, Mono
8 ohms, 1 kHz at 1% THD
Rated Output Power 1, 2:
4 ohms, 20 Hz to 20 kHz, 0.15% THD
8 ohms, 20 Hz to 20 kHz, 0.1% THD
Slew Rate 3:
Stereo Mode, each channel
Bridge Mode, mono
Total Harmonic Distortion 2, 3:
20 Hz to 20 kHz at rated output, 8 ohms
Input Sensitivity and Impedance 4:
At rated output power, 8 ohms
Balanced inputs
Overall system gain per channel
Frequency Response 2, 3:
±1dB, 1 W RMS, 8 ohms
±0.2 dB, at rated output, 8 ohms
Damping Factor 2, 3:
8 ohms, 1 kHz
Hum and Noise 1, 2:
Below rated output power, 8 ohms
Power Consumption 2:
At rated output power, 8 ohms
Cooling System:
SPS Compression System:
Dimensions and Weight:
Height:
Width:
Depth:
Weight:
Notes:
(1) @ 120 VAC, 60 Hz (2) Stereo mode, both channels driven (3) Typical value (4) Input attenuator set FCW
CA-A540B ª and CA-A800B ª SPECIFICATIONS
CA-A540B CA-A800B
450 W RMS per channel
270 W RMS per channel
900 W RMS
400 W RMS per chan
240 W RMS per chan
20 volts per uSec.
40 volts per uSec.
Less than 0.07%
1.0 V RMS, 0 dBV
6.8k ohms per leg
32.5 dB
10 Hz to 40 kHz
20 Hz to 20 kHz
Greater than 300
100 dB, unweighted
10.3 A at 100 VAC
8.6 A at 120 VAC
4.3 A at 220 VAC
Two-speed fan
Switchable with LED
5.25" (13.3 cm)
19" (48.3 cm)
15" (38.1 cm)
45 lbs. (20.5 kg)
31
700 W RMS per channel
400 W RMS per channel
1400 W RMS
625 W RMS per channel
370 W RMS per channel
20 volts per uSec.
40 volts per uSec.
Less than 0.07%
1.4 V RMS, +3 dBV
6.8k ohms per leg
32.5 dB
10 Hz to 40 kHz
20 Hz to 20 kHz
Greater than 300
100 dB, unweighted
15.2 A at 100 VAC
12.7 A at 120 VAC
6.4 A at 220 VAC
Two-speed fan
Switchable with LED
7" (17.8 cm)
19" (48.3 cm)
15" (38.1 cm)
55 lbs. (25.0 kg)