Safety Instructionsenglish; Transport And Storage Conditions; Intended Use - Festo CPX-FVDA-P Serie Descripción Resumida

CPX-FVDA-P...
1 Safety instructions
Note
Electronics modules contain electrostatically sensitive devices. Improper hand-
ling can cause damage to the electronic modules.
S Observe the handling specifications for electrostatically sensitive devices.
S Discharge yourself before installing or removing sub-assemblies to protect
the sub-assemblies from static discharges.
Note
Channel 1 and channel 2 must be connected at least once a week to ensure that
the channels work properly.

Transport and storage conditions

S
During transportation and storage, protect the product against excessive
stresses such as mechanical loads, excessive temperatures, humidity and
aggressive atmospheres.
S
Store and transport the product in the original packaging. The original pack-
aging provides adequate protection against normal loads.

Intended use

The module can provide its intended safety function:
– Safe disconnection of connected loads
if the connected loads are in a safe condition when disconnected.
This function is achieved by two-channel disconnection of the following load
voltage supplies in the CPX terminal.
– Load voltage supply line for valves U
This is used to supply valve terminal pneumatic modules in the CPX terminal
fitted on the right-hand side
– Two outputs provided by the module connection technology (module channel 1
and channel 2).
20
in CPX terminal (module channel 0).
VAL
Festo CPX-FVDA-P... 1011NH English