Ideal 61-920 Manual De Instrucciones página 17

8-5 Memory function
This function saves and displays several measurement results.
• Saving the measurement results
(1) Any data number (between 1 and 100) can be selected with the cursor button
while on the ACA or ground resistance function
Holding the cursor button down allows you to scroll through the numbers faster.
(2) To save the measurement result being displayed on the LCD, press the
result is then saved to the selected data number. ("MEM" indicator is displayed for about 1
second.)
The new data point overwrites any previous data point on the selected data number.
After saving a data point, the data number automatically advances to the next available data
number so the next measured value can be saved.
When saving data while the data hold function is activated, the reading which is being held on
the LCD will be saved.
• Recalling the measurement results in memory
To activate the memory function, press the memory mode button
displayed on the LCD.
Pressing the cursor
measurement result in memory is displayed accordingly.
To disable the memory mode, press the Memory mode button again or press the
button. The "MEM" symbol should disappear from the display.
When " - - - - " is displayed with a data number, it means no measurement result is saved.
• Clearing the measurement results in memory
To clear an individual measurement result, press the
together. The message "
the selected data number is cleared. The indication on the LCD becomes " - - - - ".
To delete all measurement results.
(1) Press the
and
(2) The instrument should turn on and display: "MEM", "
All the previously stored data is now deleted.
or changes the data number displayed on the LCD, and the
" is displayed on the LCD for about 2 sec. The measurement result on
Power
button when the instrument is off while depressing the
MEM
button. Release the
MODE
MEM
button and the
WRITE
Power button only.
Page 17
MEM
button. The
WRITE
MEM
. The "MEM" symbol is
MODE
MEM
button
MODE
" and " " for about 2 sec.
or
A/Ω
MEM
button
WRITE