Look KEO BLADE Manual Del Usuario página 35

SERVICE LIFE - WEAR - INSPECTION REQUIRED
LOOK pedals come with pre-greased bearings. The creation of a grease film on the various
rolling elements is necessary in order to obtain an optimal fluidity of the bearings to improve
the performance and the quality of the pedals. Depending on the pre-greasing, the rotation
of the axle could have a slight resistance. This resistance will decrease after the first
kilometres travelled with the pedals. The climatic conditions and the place of storage of the
bicycle have an influence on the fluidity of the grease. At low temperatures, the grease is
less fluid and at hot temperatures the grease is more fluid.
All our axles are validated only after very demanding tests, much higher than the norm in
force (EN 14781).
The service life of LOOK components depends on many factors, such as the cyclist's
morphology and the conditions of use. Impacts, falls, improper use or abrupt use in general
can compromise the structural integrity of the components and significantly reduce their
service life.
35