Identification; Marking; Declaration Of Conformity; (En) Ec Declaration Of Conformity - Abicor Binzel xFUME FLEX Manual De Instrucciones

®
xFUME FLEX

1 Identification

The xFUME
grinding processes. The device may be operated only with original ABICOR BINZEL spare parts.
These operating instructions describe only the xFUME
in 230 V and 115 V versions.
When used in these operating instructions, the terms "device", "product", and "fume extraction system"
always refer to the xFUME

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.

1.2 Declaration of conformity

®
FLEX fume extraction system is used for extracting fumes generated during welding, cutting and
®
FLEX fume extraction system.

(EN) EC Declaration of Conformity

Manufacturer
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
Authorized person for the Address
technical documentation
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product Description
The xFUME® FLEX extraction system is used to extract welding, cutting
and grinding fumes.
Designation Extraction system
Trade name xFUME® FLEX
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union harmonisation 2006/42/EC Machinery
legislation
2014/30/EU EMC
2011/65/EU RoHS
Harmonized standards used ISO 12100:2010
ISO 13857:2019
IEC 61000-3-2:2019
IEC 61000-6-2:2019
IEC 61000-6-4:2018
IEC 63000:2018
Harmonized national standards
and technical specifications
Alten-Buseck, 14.09.2021
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving: Document no.: 04-04-2020
®
FLEX fume extraction system. The device is available
see address of manufacturer
Function System for extracting welding,
cutting and grinding fumes
Type
Source of information
(Filing L96 from 29.03.2014)
(Filing L96 from 29.03.2014)
(Filing L174 from 01.07.2011)
14 September-2021
1 Identification
EN - 3