AERMEC FCWI 222V Manual De Uso E Instalación página 38

SELF-DIAGNOSTICS (UNIT DISPLAY)
1. The 7-segment display shows the room temperature in °C when the air-conditioner is turned on.
• If the temperature is set, it will flash the setting in °C for 5 seconds. OPER
• If DC FAN fault protection is active,
• If ROOM sensor is error,
• If INDOOR COIL sensor is error,
• If the OUTDOOR COIL or WATER IN sensor is in error,
If WRONG MODE water in protection is active,
2. FAN SPEED shows the real working speed of the indoor fan (not setting speed).
3. DRY, COOL, HEAT and FAN normally shows the working mode of operation.
4. TIMER shows whether the auto start timer or auto stop timer function is set.
5. OPER shows the status (on/off) of the cool/heat water valve.
6. MODE normally shows the working mode of operation.
The Mode LED is green indicates COOL or DRY mode, red indicates HEAT mode. It is off in FAN mode or power off.
SELF-DIAGNOSTICS (PFW3 WIRED PANEL)
1. The 7-segment display usually shows the room temperature in °C when the air-conditioner is turned on. The dot after 2nd digit shows the status
(on/off) of the cool/heat water valve.
• If the temperature is set, it will flash the setting in °C for 5 seconds.
• If the fan speed is set, it will blink the set
• If DC FAN fault protection is active,
• If ROOM sensor is error,
• If INDOOR COIL sensor is error,
• If the OUTDOOR COIL or WATER IN sensor is in error,
• If WRONG MODE water in protection is active,
2. HEAT , COOL normally show the set operating mode.
3. TIMER shows whether the auto start timer or auto stop timer function is set.
4. SLEEP shows the sleep is been using.
5. ECONO shows the econo is been using.
6. TURBO shows the turbo is been using.
38
FAN SPEED Dry COOL
will flash.
will be blinking.
will be blinking.
will flash.
will flash.
, , ,
will flash.
will be blinking.
will be blinking.
will flash.
will flash.
7 SEGMENTS HEAT FAN
for 5 seconds.
Timer