Section 8 Replacement Parts And Accessories - Crison MultiMeter 44 Manual Del Usuario

Section 8
Description
pH / mV + ºC measurement board
Conductivity. + ºC measurement board
Amperometric DO + ºC measurement board
Optical DO + ºC measurement board
Chlorine + ºC measurement board for galvanic cell
Chlorine + ºC measurement board for amperometric sensor
GSM module, for messages sending to a mobile phone. It includes cable for union with
MultiMeter 44
Converting module RS 485/USB. It includes cable for union and software for PC
Converting module RS 232/USB
D.O. electrode with PPS (ryton) body. VP connector, PG 13.5 thread
Spare membrane for D.O. electrode 60 50
Electrolyte for D.O. electrode 60 50, 30 mL flask
Amperometric membrane sensor for residual free chlorine measurement. MP-4 connector. With
electrolytic solution
Multiple cable with MP-4 connector, 3 m, for amperometric chlorine sensor
Multiple cable with MP-4 connector, 5 m, for amperometric chlorine sensor
Multiple cable with MP-4 connector, 10 m, for amperometric chlorine sensor
Multiple cable with MP-4 connector, 15 m, for amperometric chlorine sensor
Flow-through chamber for 1 chlorine amperometric sensor (Ø 25 mm) and 2 sensors with PG
13.5 thread
RS 232 cable to connect the MM 44 to a PC. Terminals / 3 m / DB9 female
RS 232 cable to connect the MM 44 to a PC. MP-5 / 3 m / DB9 female
Multiple cable with MP-5 connector, 3 m. for E.C. cells, A.T.C. and Chlorine sensor
Multiple cable with MP-5 connector, 5 m. for E.C. cells, A.T.C. and Chlorine sensor
Multiple cable with MP-5 connector, 10 m. for E.C. cells, A.T.C. and Chlorine sensor
Multiple cable with MP-5 connector, 15 m. for E.C. cells, A.T.C. and Chlorine sensor
Multiple cable with MP-5 connector, 20 m. for E.C. cells, A.T.C. and Chlorine sensor
Buffer solution pH 4.01 (a 25 ºC), 250 mL
Buffer solution pH 7.00 (a 25 ºC), 250 mL
Buffer solution pH 9.21 (a 25 ºC), 250 mL
Buffer solution pH 4.01 (a 25 ºC), 1000 mL
Buffer solution pH 7.00 (a 25 ºC), 1000 mL
Buffer solution pH 9.21 (a 25 ºC), 1000 mL
Standard 147 μS/cm (at 25 ºC), 250 mL
Standard 1413 μS/cm (at 25 ºC), 250 mL
Standard 12.88 mS/cm (at 25 ºC), 250 mL
Standard 80.4 mS/cm (at 25 ºC), 1000 mL
Replacement parts and accessories
Warning against system damage
Only use genuine replacement parts and accessories.
The instrument must be serviced by the manufacturer's service department at the prescribed
intervals. Do not attempt to service this product yourself, except as noted in the user manual.
N O T I C E
Item no.
44 10
44 20
44 30
44 40
44 50
44 60
44 96
44 98
44 99
60 50
60 48
98 10
60 70
11 30
11 31
11 32
11 33
60 05
11 40
11 41
90 44
90 45
90 46
90 47
92 51
94 63
94 64
94 65
94 66
94 67
94 68
97 00
97 10
97 20
97 30
75