Tabla de contenido

Publicidad

94
E
1
Press the Drive button and select the Selftimer mode. The
Selftimer indicator on the control panel appears.
2
Ten seconds after pressing the Shutter release button, the
Selftimer signal
Selftimer signal starts blinking. The shutter is released
Voyant de
after another two seconds.
retardateur
Señal del
The focus and the exposure are locked when the Shutter
autodisparador
release button is pressed halfway.
The Selftimer is canceled after the picture is taken.
Place the lens cap holder on the viewfinder to prevent light
from entering.
3
To cancel the mode before pressing the Shutter release
button, press the Drive button twice. To cancel the
Selftimer after it is activated, press the Drive button once.
(The mode remains selected.)
Note:
Use a tripod to hold the camera securely.

SELFTIMER

Publicidad

Tabla de contenido
loading

Tabla de contenido