Programming Mode; Channels; Interference Eliminator Codes; Voice Scrambling Codes - Motorola XTN446 Manual De Instrucciones

PROGRAMMING MODE

k
Your radio has a separate programming mode to enable you to
change feature settings, which do not need to be changed frequently.
There are five features settings that you can change in this menu.
1. To select Programming Mode, switch on the radio while holding
down the M and J buttons for three seconds. The radio will
emit a short burst of tones and the k icon will show in the left
hand side of the display.
2. When you have finished programming, press M for two seconds
to exit k.
A. Channels
Press ] or [ to select a channel for configuration.
7/10
B. Interference Eliminator Codes
1. Select the channel on which you wish to change the IE code.
2. Press \ once - the IE code will begin flashing.
5
3. Use ] or [ to select the required code. (code 0 disables the IE
code for the channel, which is also called 'carrier squelch mode').
4. Press M briefly to exit the menu, or for two seconds to exit
k.
C. Voice Scrambling Codes
This feature gives you additional privacy. Anyone who is listening on
the same channel and IE code will hear distorted speech, unless they
have a VS code that matches yours.
1. Select the channel on which you wish to set up the VS code.
2. Press \ until e shows in the display, next to the channel number.
3. Use ] or [ to select the required code. (code 0 disables the VS
code for the channel).
4. Press M briefly to exit the menu, or for two seconds to exit k.
D. Manager Lock
This feature allows you to disable the channel change, menu and
scan functions. M, B and Monitor can still be used. Unlike Keypad
4
Lock, this feature cannot be turned off by using \.
1. Press \ until f shows in the display.
2. Use ] or [ to choose Y (to activate) or n (to deactivate). The f
icon remains in the display when Y is chosen.
E. Assigning Channels To Pre-Set Buttons
1. Select the channel which you want to assign to a Pre-Set button.
2. Press and hold T or S until the radio beeps to confirm
6/9
assignment.
8 English