Klarstein Aquatica Manual De Usuario página 48

EN
48
Error signals
When some malfunctions come on, the appliance will show a signal to warn you:
Program light
Extra Drying:
Fast flickering
ECO and Extra Drying:
Light fast flickering
Intensive:
Light fast flickering
Rapid and Extra Drying:
Light fast flickering
Rapid, Intensive and Extra
Drying:
Light fast flickering
Rapid, Intensive,
ECO and Extra Drying:
Lights up permanently
Note: If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should
be removed before restarting the dishwasher.
Meanings
Longer inlet time.
Not reaching required
temperature
Overflow. Some element
of dishwasher leaks .
Touch button adhesion
Communication anomaly
Water tank doesn't get
enough water within
3 minutes
Possible Causes
A flow meter, drain valve,
or pump failure. It should
be repaired by a qualified
specialist.
Heating tube or thermistor
anomaly. It should be
repaired by a qualified
specialist.
Some element of
dishwasher leaks. Contact
a qualified specialist.
Display damage or
material defects. Contact
a qualified specialist.
Contact a qualified
specialist.
It should be added more
water until listening a
quick beep. Then press
Start/Pause button to
ensure that the machine is
working properly.