Safety Devices; Description Of The Unit; Initial Startup - Kärcher IVS 100/40 Hepa Exp Manual De Instrucciones

Safety devices

Insertion / locking of the vacuum
cleaner waste container
DANGER
Risk of injury when inserting / locking
the vacuum cleaner waste container
Hands could become trapped when insert-
ing and locking the waste container.
Always hold the locking lever of the vacuum
cleaner waste container with both hands
when locking.
Behavior in the event of an
emergency
DANGER
Risk of injury and material damage
when vacuuming inflammable materi-
als, or in the case of a short-circuit or
other electrical faults
Danger of inhalation of gases hazardous to
health, danger of electric shock, danger of
burns.
In the event of an emergency, switch off the
device and unplug the mains plug.

Description of the unit

For the figures, please refer to the
graphics page
Illustration A
Steering rollers with parking brake
1
Sliding handle
2
On / Off switch
3
Control cabinet
4
Filter cleaning cover
5
Filter cleaning handle
6
Suction pipe holder
7
Pressure gauge
8
Hepa filter
9
Filter chamber lock
10
Muffler
11
Cable holder
12
Suction hose connection nozzle
13
Vacuum cleaner waste container un-
14
locking lever
Floor nozzle holder
15
6
The electro motor for this device is listed
under number E10822 of the Underwriters
Laboratories. The electro motor is suitable
for use in the following hazardous zones:
– Class II - Group F
– Class II - Group G

Initial startup

For the figures, please refer to the
graphics page
ATTENTION
Electrical shock due to a short-circuit
Exceeding the grid impedance can lead to
a short-circuit.
The maximum permissible grid impedance
at the electrical connection point (see Tech-
nical data) must not be exceeded.
DANGER
Damage to the skin, lungs and eyes
through fine dust
Emission of fine dust due to operation with-
out a filter or with a damaged filter
Do not vacuum without a filter or with a
damaged filter.
ATTENTION
Damage to the device
The suction motor can be damaged when
operating the device without a filter or with
a damaged filter.
Do not vacuum without a filter or with a
damaged filter.
1. Bring the device into the working posi-
tion and secure with the parking brake, if
necessary.
2. Ensure that the suction head is fitted
correctly.
3. Insert the suction hose into the suction
hose connection.
Illustration B
4. Plug the desired accessory onto the suc-
tion hose.
5. Before starting vacuuming, check the fill-
ing level in the dirt receptacle and empty
the vacuum cleaner waste container if
necessary
English
Applications