Warranty And Limitations Of Liability - Beem FP01 Manual De Instrucciones

29
Storage
Thoroughly clean the glass jug again (see the "Cleaning and
Care" chapter) to avoid possible mould formation. Mould can
cause spots and damage that can no longer be removed / re-
paired.
Allow the glass jug and its accessories to dry completely and
store them in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.

Warranty and Limitations of Liability

The warranty does not cover faults caused by incorrect
handling, damage or attempted repairs. The same applies to
normal wear and tear.
We do not accept any liability for damage or consequential
damage resulting from:
•
Failure to follow the operating instructions
•
Non-designated use
• Improper or unsuitable handling
• Repairs which are not carried out properly
• Unauthorised modifi cations
•
Use of outside parts or spare parts
•
Use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period
of the product so that the product can be properly
repacked if it needs to be returned. The warranty claim
will lapse if any damage is caused during transport.
EN