User Functions; Data Recall; Weight Unit Toggle Mode - Snap-On EEWB331B Manual De Operador

8.0 USER FUNCTIONS

Use this function to store or recall rim data (wheel type,
diameter, width, Offset, fi ne mode, oz. mode and mm
mode) in or from the memory. 4 sets of wheel data (the
so-called user data) can be stored.
Figure 31a

8.1 DATA RECALL

When it is turned ON the balancer sets the wheel data
regarding user A to the system default values and sets
the current user to user A.
To activate:
• Press the "MODE" and the "Weight Placement"
keys simultaneously for 3 seconds. See Figure 31a.
• The function starts with the SAVE option.
• The data can be saved to the user displayed on
the right.
To clear the data (without saving):
• Select Enter when user "- -" is displayed.
To save data:
• Select + or – to scroll along User A, b, C or d.
• Select Enter to save to the selected user.
The function proceeds with the RECALL option.
The data can be recalled from memory by selecting
the appropriate user. The selected user will be the new
current user, such as User b.
No recall required (no change in user required):
• Select Enter when user "- -" is displayed.
To recall data:
• Select + or – to scroll along User A, b, C or d.
• Select Enter to recall the selected user.
• The current available wheel data will be replaced
by the recalled data such as: "b".
+
Figure 31b

8.2 WEIGHT UNIT TOGGLE MODE

Setting the basic weight unit: oz/grams
Select this mode to change the unit of measure of the
weight before or after carrying out a balancing operation.
• Press the "MODE" key until the weight units
indicator flashes. The "oz" indicator will start
fl ashing.
• The display will now look like Figure 31b.
• Press Return.
The weight setting status now calculates weights using
a different unit of measure (from grams to ounces or
from ounces to grams).
The program returns to the main menu.
EEWB331B 23