Warranty Period - Sevylor TAHITI Manual De Utilización

4. When the third layer of glue is dry, apply the patch without pressing and adjust the positioning if required, press the
air bubbles which may have formed under the patch by smoothing the patch with a round object such as a spoon, do
this procedure by starting in the center of the patch towards the outside, clean the excess glue with a solvent. Drying:
12 hours.
1. Perform all of your repairs in a well-ventilated area.
2. Avoid inhaling glue vapors or swallowing.
N.B.: The repairs on the weldings cannot not be glued. In this case, the chamber needs to be replaced.

Warranty Period

Years 2
WARNING!
3. Avoid contact with the skin or the eyes.
4. Keep all repair materials (glue, solvents, etc.) away
from children's reach.
9
E
N
G
L
I
S
H