Attaching Adapter Plate To Screen With Vesa; Mounting Patterns - PEERLESS SmartMount RTFPA50U Serie Instalación Y Ensamblaje

Attaching Adapter Plate to Screen with VESA

Choose hole pattern as shown in detail 4 for VESA mounting pattern. Begin with the shortest length screw, hand thread
4
through adapter plate into screen as shown in detail 5. Screw must make at least three full turns into the mounting hole
and fit snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length
screw from the fastener pack. Repeat for remaining mounting holes. Securely tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
If you have any questions, please call Peerless customer care at 1-800-865-2112. Visit our website at
www.peerlessmounts.com/2 to determine the correct fasteners to use for your particular screen.
®
VESA 100 x 100
VESA ® 100 x 100
SCREEN
ADAPTER
PLATE

Mounting Patterns

®
VESA 200 x 100
®
VESA 200 x 100
NOTE: For screens with a hole
pattern in a pocket,
spacers go between
adapter plate and
screen.
12 of 42
®
Mounting Pattern
VESA
VESA
ISSUED: 03-08-07 SHEET #: 095-9264-2 10-26-09
®
200 x 200
DETAIL 4
®
200 x 200
DETAIL 5