Pinlock ® Visor - SCHUBERTH C3 PRO Manual Del Propietário

D. THE HELMET
®
11. PINLOCk VISOR
The Pinlock ® lense is affixed to the inside of the face shield with
a flexible silicone seal and held in place under tension by the two
eccentric pins. This creates an insulating air cushion between the
face shield and Pinlock ® lense preventing any fogging of the face
shiled.
COATING
The main plate has a HighClear ®
sides.
Note:
The helmet should never be used to hold gloves or any other
objects as this may damage the scratch-sensitive Pinlock
lense.
Note:
The Pinlock ® lense is supplied with a protective film. Remove
this film before using the helmet for the first time.
Note:
The Pinlock ® lense may only be used in conjunction with the
SCHUBERTH main face shield that has been specially designed
for this purpose. Other face shields must not be fitted.
Opening the face shield
To open the face shield, use your thumb to
push the face shield up using one of the finger
tabs situated to the left and right of the face
shield, and move it to the desired position.
20
anti-scratch coating on both
®
Face shield (including urban position)
The face shield can be locked in any one of seven positions.
The second position (urban position) locks in place more firmly,
providing greater resistance when the face shield is in this
position. This makes it easier to lock the face shield in the urban
position, especially while riding.
• When you push the face shield open, it may well travel beyond
the urban position
• but it is easy to find this position by moving it downwards
again. The face shield mechanism requires no additional
lubrication. The face shield can be operated at any time
irrespective of the position of the sun visor.
Closing the face shield
To close the face shield, grip the
finger tabs at top left and right and
press the face shield down with one
movement until it audibly locks into
place.
REPLACING THE VISOR SHIELD
Changing the face shield is easy to do without tools using the
convenient EasyChange mechanism. To replace the face shield,
it is helpful to place the helmet on a flat surface or on your lap
while seated.
21