Before Starting - Stihl BG-KM Manual De Instrucciones

THE POWER TOOL
For illustrations and definitions of the
power tool parts see the chapter on
"Main Parts."
!
Warning!
Never modify this power tool in any way.
Only attachments supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL model are
authorized. Although certain
unauthorized attachments are useable
with STIHL power tools, their use may, in
fact, be extremely dangerous.
If this tool is subjected to unusually high
loads for which it was not designed (e.g.
heavy impact or a fall), always check
that it is in good condition before
continuing work. Check in particular that
the fuel system is tight (no leaks) and
that the controls and safety devices are
working properly. Do not continue
operating this machine if it is damaged.
In case of doubt, have it checked by your
STIHL servicing dealer.
BG-KM
THE USE OF THE POWER TOOL
Transporting the Power Tool
!
Warning!
To reduce the risk of injury, do not
operate the machine unless it is fully
assembled with a properly mounted
blower tube.
!
Warning!
Small particles (e.g. dust) blown through
the blower tubes and nozzle can cause
a static charging of the blower tubes.
This is especially true in low humidity
and high dust conditions.
!
Warning!
When transporting your power tool in a
vehicle, properly secure it to prevent
turnover, fuel spillage and damage to the
unit.
English / USA

Before Starting

!
Warning!
Always check your KombiTool for proper
condition and operation before starting.
Never attempt to modify the controls or
safety devices.
!
Warning!
Never use a power tool that is damaged
or not properly maintained.
Keep the handles clean and dry at all
times; it is particularly important to keep
them free of moisture, pitch, oil, grease
or resin in order for you to maintain a firm
grip and properly control your power
tool.
5