Titrating - BRAND Titrette Instrucciones De Manejo

5 Titrating

5 Titrating
1. Switching on the instrument
a.
1 x
2. Filling the instrument
1 x
3. Titrating
b.
4. Filling the instrument after titration
a.
To reduce crystal deposits and evaporation, always fill the instrument all the way up to the upper
stop position after titration.
60
Operating manual
a.
To switch the instrument on or off, briefly press the ON/
OFF button.
a.
Fill the instrument up to the upper stop position by gen-
tly turning the hand wheels.
b.
Briefly press the CLEAR button one time to set the dis-
play value to zero.
a.
Hold a suitable receiving vessel under the opening of
the titrating tube.
b.
Dispense liquid up to the transition point by turning the
hand wheels.
If the fill volume is insufficient for the entire titration, gently
turn the hand wheels back to the upper stop position to fill
(the displayed value remains unchanged during this
process). Then continue titration.
NOTICE
9974 69