Factory Default Setting - BRAND Titrette Instrucciones De Manejo

11 Additional functions
3. Entering the adjustment value
a.
4. Confirming input
a.
In rare cases, when entering the new adjustment value, the sum of the old and new adjustment values
can amount to zero. In this case, the factory setting is restored and CAL disappears from the display.

11.1.3 Factory default setting

The continuously displayed CAL symbol indicates that an adjustment has already taken place. How-
ever, the factory default setting should be restored.
1. Entering CAL mode
a.
70
Operating manual
a.
The adjustment value is 0.017 ml, for example. Press the
Pause or On/Off button until the value has been
reached (the first press of a button sets the display to
zero).
-
+
a.
Press the CLEAR button. The old and new adjustment
values are added automatically.
ð
The change in adjustment is indicated by the CAL sym-
bol.
NOTICE
a.
With the instrument powered on, press and hold the
> 3 s
CLEAR button for more than 3 seconds until the follow-
ing modes are repeatedly shown one after another in
the display:
CAL — GLP — APO — dP
9974 69