Further Recording Possibilities - Philips FW-R55 Manual De Instrucciones

Further recording possibilities

DISP LAY / RDS
High speed recording of an entire disc, a track or a
program
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press either CD1, CD2 or CD3 to select the disc you wish
to record from.
3
Press RECORD on the set to enter the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following high speed recording modes:
If a disc from the CD changer is selected:
REC CD1 (or 2,3) FAST?: for high speed recording of
CD1 (or 2, 3)
Continue with step 5.
REC TR FAST?: for high speed recording of a track
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired track.
REC TR and the track number is displayed.
Continue with step 6.
If a program is available:
PROG FAST?: for high speed recording of the program
5
Press YES to confirm your selection.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total recording time of the
CDR(W) and RECORD? are displayed.
Note: If the CDR(W) already contains a recording, ALC will also
become active.
6
Press YES to start high speed recording.
The arrow lights,
RECORDING IN SESSION
speed recording starts and the actual recording time left
starts to count down.
To stop recording press Ç on the set.
0 0
Normal recording while listening to an entire disc,
a track or a program
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
ON • OFF LEVEL
2
Press either CD1, CD2 or CD3 to select the disc you wish
AUX
to record from.
3
Press RECORD on the set to enter the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following normal recording modes:
If CD changer is selected:
If a program is available:
5
Press YES to confirm your selection.
6
Press YES to start normal recording.
To stop recording press Ç on the set.
0 0
Do not forget to finalize! Finalizing a CDR(W) disc is
a simple procedure, necessary to:
– play a recorded CDR on a standard CD player, or
– play a recorded CDRW on a CDRW compatible
is shown, high
Internal recording
RECORD CD1 (or 2,3)?: for listening to CD1 (or 2, 3)
during normal recording
REC TRACK?: for listening to the track during normal
recording
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired
track.
REC TR and the track number are displayed.
Press YES to start normal recording.
REC PROG?: for listening to the program during normal
recording
The arrow starts blinking.The remaining recording time
of the CDR(W), the total recording time of the
CDR(W) and RECORD? are displayed.
The arrow lights,
RECORDING IN SESSION
normal recording starts and the actual recording time left
starts to count down.
CD player and CD recorder.
is shown,
21