Recording A Program; Recording From The Tuner - Philips FW-R55 Manual De Instrucciones

Internal recording

Recording a program

High speed recording and automatic finalizing
(optional) of the current program
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press COMPILE CD on the set to enter the recording menu.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total playing time of the source CD
and RECORD PROG? are displayed.
Note: If no program is available and you press COMPILE CD,
you will enter immediately the program menu. Start your
programming and return to the recording menu by pressing
PROG or COMPILE CD.
3
Press either:
YES to confirm,
or
NO to change the program.
starts blinking. Now you can change the program
PROG
(see "Program") and return to the recording menu by
pressing COMPILE CD.
AUTO FINAL? is displayed.
4
Press either:
YES, if the CDR(W) is to be finalized after recording,
or
NO, if the CDR(W) is not to be finalized after recording.
The arrow lights,
RECORDING IN SESSION
speed recording and finalizing (if selected) start and the
actual recording time left starts to count down.
20

Recording from the tuner

1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press TUNER repeatedly to select the FM tuner.Then select
the desired radio station (see "Tuning to radio stations").
3
Press RECORD on the set to enter the recording menu.
REC FM TUNER is displayed.
4
Press YES to confirm.
PREPARING and RECORD? are displayed.
5
Press YES to start recording.
The arrow lights,
recording starts and the actual recording time left starts
to count down.
6 Press Ç to stop recording.
Do not forget to finalize! Finalizing a CDR(W) disc is
a simple procedure, necessary to:
– play a recorded CDR on a standard CD player, or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
is shown, high
DISP LAY / RDS
RECORDING IN SESSION
ON • OFF
LEVEL
AUX
is shown,