Cannondale HEADSHOK SOLO w/DL50 El Manual Del Propietario página 3

SOLO RIGID
1.125 in
STEERER
POST MOUNT BRAKE BOSSES
LEFTY WHEEL HUB
AXLE BOLT
Figure 6.
SPECIFICATIONS
Intended Use
Headtube Compatibility
Wheel Hub
Brake
HOUSING GUIDE
LEG
HOUSING GUIDE
KH057/
AXLE THREADS
Thread repair kit
CONDITION 2, General Purpose Riding
See " SECTION B. Intended Use" in your
Cannondale Bicycle Owner's Manual
WARNING : NOT FOR MOUNTAIN BIKE
OR JUMPING USE
1.125 in
Cannondale Lefty
Axle bolt torque: 15 Nm , 133.0 In Lbs
Post Mount
Maximum torque: 10 Nm, 88.5 In Lbs
SOLO FRONT WHEEL
REMOVAL
1 Place the bike in a bike stand with the front wheel suspended.
2. Loosen and remove the brake caliper mounting bolts with a 5 mm Allen key. Be sure
to note the position of brake alignment shims, spherical washers, or spacers between
brake bosses and the caliper. Consult the brake manufacturer's instructions.
Figure 7.
3. With a 5 mm Allen key, turn the hub extraction bolt counter-clockwise to disengage
the wheel from the spindle.
Figure 8.
Continue turning the bolt until the wheel can be removed easily from the spindle.
See Figure 9.
NOTICE
Make sure the hub is completely disengaged from the spindle
before attempting to remove the wheel. NEVER try to pull the
wheel off forcefully; this will damage the spindle threads.
3