Technical Specifications - Festo DNCM-POT Serie Instrucciones De Utilizacion

DNCM−...−POT
13

Technical specifications

Type
Complete product
Ambient temperature
Mounting position with electronic closed−
loop control
Mounting position when used as a
measuring cylinder
Cylinder
Operating pressure max. 10 bar
Operating pressure with Soft Stop
Medium
Filter recommendation in conjunction with
proportional directional control valve
Speeds achievable in conjunction with
"Soft Stop"
Medium
Maximum
3 kg (DNCM−32) or
8 kg (DNCM−50) work load at 500 mm stroke
Materials
Elektromagnetic compatibility
Interference emitted
Immunity against interference
1)
The component is intended for industrial use.
Festo DNCM−...−POT 0608a English
DNCM−32−... DNCM−50−...
− 10 ... + 80 °C
Horizontal
As desired
Max. 10 bar
5...7 bar
Compressed air
lubricated
filtered
lubricated and filtered
Medium pore width max. 5x10
0.7 m/s 0.66 m/s
2.2 m/s 1.7 m/s
Aluminium diecasting,
anodized aluminium, steel, nickel−
plated brass, PUR, PE, PBT, POM, NBR
Tested as per DIN EN 61000−6−4
1)
(industry)
Tested as per DIN EN 61000−6−2 (in
dustry)
−6
m
29