DMSP/MAS
3
Function
Through pressurisation, the contraction membrane 3 of the DMSP/
MAS expands in the direction of the periphery. This creates tensile force
and a contraction motion in the longitudinal direction.
The DMSP/MAS is single-acting. Movement is transferred to the pay
load with the aid of connecting elements (è 11 Accessories), which
are screwed into thread 1. For the DMSP, the adapter is already integ
rated.
A force limiter is integrated into the connecting flange 2 of the
MAS-...-K. If the limit of the force limiter is exceeded, a valve dis
charges the excess compressed air.
4
Storage
Unfavourable storage conditions can impair operational reliability.
Ensure that the following points are complied with in storage:
– Do not store DMSP/MAS in a kinked condition
– Protect it from UV radiation (leave it in the protective sleeve until use)
– Store with low humidity ( 60 %)
– Avoid high temperatures (max. +30 °C)
Protect product in storage from damaging influences.
Damaging influences include:
– corrosive coolant or other materials (e.g. ozone)
– oils, greases and grease-solvent vapours
– glowing chips or sparks
20
Ó Ó
Ó Ó
Ó Ó Ó Ó
Ó Ó Ó Ó
Ó Ó
Ó Ó
Ó Ó
Ó Ó Ó
Ó Ó Ó
Fig. 2
Festo – DMSP/MAS – 1508e English