Environment; General Information; Information On Data Protection - Festool ETS 125 REQ Manual Del Usuario

English
To connect two Systainers
Place one Systainer on the top of the other
(Fig. [7 A]).
Turn the T-loc [7-1] to one of this
positions (Fig. [7 B]).
The Systainers are connected and locked.
A new generation Systainer is connectable
on top of a previous generation Systainer
by the four latches of the previous
Systainer.
SYS-b-1

12 Environment

Do not dispose of the device as domestic
waste! Dispose of machines, accessories and
14
packaging at an environmentally responsible
recycling centre. Observe the respective nation­
al regulations.

13 General information

13.1 Information on data protection

The power tool contains a chip which automati­
cally stores machine and operating data. The
data saved cannot be traced back directly to an
individual.
The data can be read using special (contactless)
devices and shall only be used by Festool for
fault diagnosis, repair and warranty processing
SYS-a
and for quality improvement or enhancement of
the power tool. The data shall not be used in
any other way without the express consent of
the customer.
SYS-b