Nogueira PTN-1000 G3 Manual De Instrucciones página 109

4.2.4- Placing the fasteners in the platform
Pecus G2)
Insert the 2 fasteners (A) into the holes
1.
shown in the illustration on the side.
Fix the fasteners with the nuts (B) and
2.
washers (C) (figure).
B = 7/16" Lock Nut
(02 pcs)
C = Flat Washer Ø12 x Ø29 x 4.76 (02 pcs)
NOTE!
The nuts and washers used for
mounting above are find in the kit
supplied with the head.
Instructions Manual
4. Preparation
(New Pecus and New
B
A
A
C
33