1- Chain Lubrication (D); 2- Bearing Lubrication Of The Drums - Nogueira PTN-1000 G3 Manual De Instrucciones

6.6.1- Chain lubrication (D)

Proper lubrication prolongs the service life,
prevents oxidation and premature wear of
the chains.
Apply a light layer of special oil to chains, such
as the MAXLUB ND-03 Bardahl.
If available, use special chain lubricant
(spray grease) as it provides more efficient
lubrication between the chain pins and rollers.
NOTE: Do not use ordinary grease on the
chain as it does not penetrate the links and
pins.
L u b r i c a t i o n p e r i o d : L u b r i c a t i o n i s
recommended every 40 working hours, at the
end of the day, while chains are still heated.
Whenever it is necessary, wash them with
kerosene or diesel fuel, using a brush.
6.6.2- Bearing lubrication
of the drums
Use a special grease for bearings, based on
lithium soap, NLGI classification 2 (Example:
LUBRAX LITH-2).
LOWER DRUMS BEARINGS
Using a grease gun or pump, lubricate the
lower bearing of the drums by the two grease
points (A).
Instructions Manual
6. Maintenance
D
A
61