Harvester Preparation; 1- Remove The Aligners - Nogueira PTN-1000 G3 Manual De Instrucciones

4.2- Harvester Preparation

The necessary parts for the coupling are supplied with the Head. The procedure
is the same for the harvesters with pulley and belt or gearbox and cardan.
NOTE!
For coupling the head to NEW PECUS
(first generation), it is necessary to
upgrade the harvester to generation
2. In this case, you must purchase the
G1 UPDATE KIT for G2. This update is
necessary for the perfect coupling of
the Head to the machine.

4.2.1- Remove the aligners

First, remove all items listed below from the
machine: If the harvester model does not
have fairing:
Remove the fairing (A).
1.
Remove the 2 aligners (B).
2.
If the harvester model has auxiliary roller:
Remove the auxiliary roller (C).
1.
Instructions Manual
4. Preparation
A
B
B
C
25