Extremis Sticks Manual Del Usuario página 15

floor fastening
Position the base where you want to install
your Sticks. Insert a pen in the hole in the
middle of the base and mark the floor.
Insert the rods in the base.
extra weight for windy places
Available as an option, 8 or 11 kg.
CONTENT
1 x galvanised steel sheet [1]
4 x plastic glide [2]
4 x screw (5x40) [3]
Drill a hole at the marked spot. Insert a plug
n° 8 in the hole.
Tip: If possible, cover the screw with a
black cap.
Position the base making sure that the hole
in the middle of the base is situated exactly
above the hole you have just drilled. Insert a
screw (diam. 6 mm, L: 80 mm) in this hole
and tighten it as much as possible.
When all the rods are in place, the cap is
not visible.
english