Minebea Intec IS X Serie Advertencias De Instalación Y Medidas De Seguridad página 3

Contents
4 Warning and Safety Information
6 Installation Instructions
11 Installation
12 Care and Maintenance
The following symbols are used in
these instructions:
§ indicates required steps
$ indicates steps required only under
certain conditions
> describes what happens after you
have performed a certain step
– indicates an item in a list
indicates a hazard
!
Make sure you observe the following
warning and safety information in
its entirety during installation and
operation, as well as while performing
maintenance and repair work on
the equipment. It is important that
all personnel using the equipment
understand this information, and have
access to it at all times. Furthermore,
the warning and safety information
supplied with any electrical equipment
connected, such as peripheral devices,
must be observed as well. The warning
and safety information can be sup-
plemented by the equipment operator.
Make sure all operating personnel are
informed of any additions to these
instructions.
3
IS...-X Models