Minebea Intec IS X Serie Advertencias De Instalación Y Medidas De Seguridad página 9

1
2
Leveling the weighing platforms using the level indicator:
Models IS150IGG-HX, IS300IGG-HX
– Weighing platform with load plate
– Position the weighing platform at the place of installation and remove the load plate.
Removing transport locking devices:
Models IS150IGG-HX, IS300IGG-HX
Proceed as follows, working on the locking device marked in red:
– Remove screw 1 (see below).
– Loosen screw 2, turn the locking device 180°, and tighten screw 2 again.
– Tighten screw 1 on the lever.
Notes on transporting the weighing platform:
Replace the transport locking device before moving or shipping the weighing platform.
9
IS...-X Models