Rotary Switch - Festo CPX Serie Manual Del Usuario

Reserved setting
Leave the switch elements of DIL switch 2 set to
OFF.
3.3 Setting the rotary switch
The 16−element rotary switch (0, 1, ..., F) serves as a RUN/
STOP switch for the PLC. Leave the rotary switch at posi
tion 0" (STOP) during installation.
Setting
0 = STOP
PLC program has stopped. Programs stop when
the setting of the rotary switch is modified from
1 ... F to 0.
1 ... F = RUN
User program started. Programs start when the
setting of the rotary switch is modified from 0 to
1 ... F.
The switch position can be interrogated in the
user program and used for programming pur
poses.
Modifications to the position of the rotary switch are transmitted to
the controller with a delay of 500 ms.
Festo CPX−FEC 0404NH English
DIL switch 2

Rotary switch

19