Manual Breast Pump Assembly - Medela symphony Manual De Instrucciones

7. Assembly of Pump Kit - Lactina
Tip
T
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Breast shield
• Breast milk bottles/container
• Lid
• Connector
• Yellow valve head
• White membrane
• Piston
• Cylinder
Note
• Use Authentic Medela Spare Parts
only. See page 5 for details.
• Check pump kit components for
wear or damage before use and
replace if necessary.
• All components must be completely
dry before use for proper
performance and to prevent
damage to the pump.
24 24 24
®
7C. Manual Breast pump Assembly
For manual breast pumping follow the
instructions below.
1
Cylinder
Slide the vacuum regulator
ring onto the cylinder. Push
handle end of piston into the
cylinder.
4
Push yellow valve head onto
inner ring of connector bottom.
7
Set vacuum regulator ring to
"MIN".
(cont.)
Piston