Imetec M3505 Instrucciones Para El Uso página 15

1. Handle
2. air flow manual adjustment device
3. Telescopic suction pipe
3A. Telescopic pipe adjustment button
3B. Adjustable telescopic pipe
4. Combination carpet/hard floors brush and similar
4A. Brush position toggle switch
5. Flexible suction pipe
6. Flexible suction pipe locking buttons
7. Electronic power regulator
8. ON/OFF switch
9. dust collection system release button
10. Carry handle
11. Suction inlet
12. Coupling for vertical parking position
13. Technical data
14. Power cable
15. automatic cable winding button
• Connect the flexible suction pipe (5) to the suction coupling (11) of the appliance rotating
the base until the locking buttons of the flexible suction pipe click in their seat (6) indicating
proper fastening. [Fig. B1].
• Connect the handle (1) of the flexible pipe to the suction pipe (3).
• Adjust the length of the telescopic pipe by pressing the adjustment button (3A) in the
direction of the arrow and removing or retracting the adjustable telescopic pipe (3B) [Fig.
C1].
• Select the combination carpet/hard floors brush and similar (4) or the accessory (21)
suited to the surface to be cleaned and connect the part to the telescopic pipe (3).
Combination carpet/hard floors brush and similar (4)
adjust the combination brush according to the type of flooring, using the brush position
toggle switch (4A) [Fig. D1] to change from a ceramic floor position to a rugs and carpet
position.
Your appliance is equipped with the following attachments:
Crevice tool (21A): To clean corners and crevices, such as radiators, skirting boards,
blinds and awnings.
Multipurpose nozzle (21B): To clean sofas, armchairs, upholstered chairs and curtains.
Dusting nozzle (21C): To clean small objects, audio and Tv appliances, computers and
furniture.
Parquet brush (21D): Special brush to clean parquet floors.
Mini Animal Care Turbo Brush (21E - Only for Art. 8631): Specific for easily removing
animal hairs from any surface. Suitable for the following surfaces: sofas, upholstery, ceramic,
marble, carpets and rugs without fringes.
16. dust collection system
16a. upper cover
16B. Upper cover opening/locking button
16C. Safety interlock
16d. HEPa premotor filter
16E. dust container
17. Coupling for horizontal parking position
18. Outlet filter
19. discharge filter grid
20. release/locking button of the outlet filter grid
21. accessories
21a. Crevice tool
21B.Multipurpose nozzle: To clean different surfaces
21C. dusting nozzle
21d. Parquet brush
21E. Mini Animal Care Turbo Brush (Only for Art.
8631)
ASSEMBLY
ACCESSORIES
EN
13