Cleaning And Maintenance; Cleaning The Appliance - Imetec M3505 Instrucciones Para El Uso

• The suction power can also be changed by means of the manual adjusting device of
the air flow (2) found on the handle (1) [Fig. E1].
Closed: Increases the suction power.
Open: reduces the suction power.
• Switch off the vacuum cleaner by pressing the ON/OFF button once (8) and unplug the
power cord (14) from the power socket.
• Press the automatic cord winding button (15) to wind the power cable [Fig.F1].
Hold the plug while winding the cable in order to prevent whiplash.
ATTENTION! The vacuum cleaner has a motor protection thermostat,
which intervenes in the case of overheating (caused by the inlet
opening, filters, etc. being clogged). If it is triggered, press the ON/OFF
(8) button to switch the appliance off and let it cool down completely
for a few hours. Verify whether dust has clogged the filters or the inlet
opening before restarting the appliance.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
CAUTION! Periodicaly verify that filters and the inlet opening
are not clogged.
CAUTION! DO NOT use solvents or other aggressive or
abrasive detergents in order not to damage the appliance
surfaces.
CAUTION! Empty the dust container and clean the filters
after every use in order not to damage the appliance.
WARNING! Let the filters dry completely after washing them
for at least 24 hours before reassembly.
WARNING! Make sure all cleaned parts are completely dry
before reusing the appliance.

CLEANING THE APPLIANCE

When necessary, clean the appliance with a damp cloth.
CLEANING ThE COMBINATION CARPET/hARD fLOORS AND SIMILAR (4)
With the motor ON, rub the brush with your hand to remove the dust and fluff, which will be
drawn.
CLEANING THE DUST COLLECTION SYSTEM (16)

CLEANING AND MAINTENANCE

EN
15