Publicidad
Idiomas disponibles
Idiomas disponibles
W O L F
F RY E R M O D U L E
C A R E
R E C O M M E N D AT I O N S
C O M P O N E N T
C A R E R E C O M M E N D A T I O N
CAUTION: Make sure the fryer module is off and all surfaces are cool before
Fryer Module
cleaning any part of the unit.
Frame and Lid
Stainless steel
Exterior Cleaning: Use a soft, nonabrasive stainless steel cleaner like
Signature Polish and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe the surface with a water-dampened microfiber cloth,
followed with a dry microfiber cloth. All work should follow the same grain
direction as the finish. Best results are obtained by keeping the cloth in
continuous contact with the metal.
For best results, wipe up spills and spatters as they occur and immediately
after the module has cooled. If splatters are allowed to dry, they may perma-
nently damage or stain the finish.
CAUTION: Do not use abrasive cleaners (e.g., Comet or Soft Scrub); they will
permanently scratch the surface.
Fryer Basin
After emptying the oil from the fryer basin, pour 3.8 L water with dish soap
Stainless steel
into the empty basin. Scrub with a nylon brush. Rinse well and drain. Dry
thoroughly.
WARNING: If the fryer basin is not dried thoroughly, excess water may
spatter hot oil, causing burns.
WARNING: Pay particular attention to the drain outlet and manual valve
when emptying, as oil may be hot. Allow unit to cool.
Fryer Baskets
Both the large and small fryer baskets can be cleaned by hand with warm
Nickel-coated
soapy water or placed in the dishwasher.
wire mesh
Basket Hanger
The wire basket hanger can be cleaned by hand with warm soapy water or
Nickel-coated
placed in the dishwasher.
wire mesh
Control Panel
Use warm soapy water with a soft cloth to remove fingerprints and residual
Ceran glass
food and water stains from the control panel. Apply cleaner to the cloth
before wiping panel. Do not use aggressive commercial cleaners, as they
may damage the assembly.
U S E & C A R E
15
Publicidad
