Labeling Recordings - Sony Walkman MZ-S1 Manual De Instrucciones

Labeling recordings

1
Insert a disc and do the following
operations:
To label a track
Start playing or recording a track you
want to label, and label the track
while playing or recording
operations.
To label a group
Turn group mode on (page 30) and
start playing or recording a track
within the group you want to label,
and label the group while playing or
recording operations.
To label a disc
If a disc is already recorded, follow
the procedures from step 2 while the
recorder is stopped. If a disc is new,
start recording and label a disc while
recording.
If you label a disc with group settings,
turn group mode on (page 30).
2
Press MENU.
3
Press . or > repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
4
Press . or > repeatedly until
the following item appears in the
display, and then press ENTER.
When labeling a track
"T: Name"
When labeling a group
"G: Name"
When labeling a disc
"D: Name"
The cursor flashes and the track,
group, or disc is ready to be labeled.
The disc is ready to be labeled.
5
Press . or > repeatedly to
select a letter and press ENTER.
The selected letter stops flashing and
the cursor moves to the next input
position.
40
-GB
The buttons used for character input
and their functions are listed below:
Functions
To select a
character
To enter a letter
To enter a name
To insert a blank
space to type in a
new letter
To delete a letter
and move back all
following letters to
the left
To cancel labeling
6
Repeat step 5 and enter all characters
of the label name.
7
Press ENTER for 2 seconds or more
The track or disc is labeled.
To cancel labeling,
Press CANCEL in step 6.
Notes
• When the recording is stopped while labeling
a track, a group, or a disc during recording, or
when the recording moves on to the next track
while labeling a track, the input at that point is
entered automatically.
• "LP:" is automatically added at the beginning
of the track name for tracks recorded in
MDLP mode (page 28).
• You cannot label or relabel the premastered
disc or blank disc.
Operations
Press . or
>.
Press ENTER .
Press ENTER for 2
second or more.
Press VOL + and
END SEARCH at
the same time.
Press VOL – and
END SEARCH at
the same time.
Press CANCEL.
.