Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
3.5 Adjusting the carpet brush
The carpet brush can be adjusted to match the height of the pile.
To do this, set the vacuum cleaner to the working position
(approx. 45º) and select the required setting between 1 and 4.
<Figure 6>
Note: The brush cannot be adjusted when the cleaner is in the
upright position
Position 1:
shallow pile
Position 2:
deep pile
3.6 Electronic brush monitoring
Brush functioning is continuously supervised by electronic brush
monitoring.
not illuminated:
brush functioning properly
orange light on:
set the pile height adjusting knob at a lower pile height
orange light on even at the lowest setting:
change brush strip.
3.7 Red indicator light
If the indicator light is on, please check the following:
a) is the filter bag full?
b) is the suction hose or connecting hose blocked?
Either exchange the filter bag or eliminate blockages.
Please note: There is no malfunction if, when vacuuming with the suction
hose, the hand pipe occludes and as a result the light comes on.
Crevice nozzle .................................................................................... 6.905-531 .... 6.905-531
Upholstery nozzle ............................................................................... 6.900-233 .... 6.900-233
Brush strip, black ................................................................................ 6.905-503 .... 6.905-691
*
Brush strip, red (hard) ........................................................................ 6.905-596 .... 6.905-861
*
Set of expendable parts ...................................................................... 2.883-454 .... 2.883-478
*
Paper filter bags (10 units) ................................................................. 6.900-488 .... 6.900-488
Fleece filter bag ................................................................................... 6.904-311 .... 6.904-311
Safety filter ........................................................................................... 5.731-047 .... 5.731-047
*
Mounting kit Microfilter ........................................................................ 6.904-127 .... 6.904-127
*
Microfilter (5 pcs.) ............................................................................... 6.904-138 .... 6.904-138
* not included in the scope of supply
8
4. Accessories
Figure 6
CV 36/2
CV 46/2
Publicidad
Tabla de contenido
