Sauder Heritage Serie Manual De Montaje página 11

6 6
B
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
Dowel end
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver
as tight as possible.
Fasten the ENDS (A and B) to the SHORT MOLDINGS (V). Tighten four TWIST-LOCK
Fasten the UPRIGHTS (C2 and D2) to the TOP INSERT (F2). Tighten four TWIST-LOCK
402159
D2
V
www.sauder.com/services
Finished edge
C2
F2
®
FASTENER
Finished edge
A
V
® FASTENERS.
®
FASTENERS.
Page 11