Brown 1-1/2" Flat Head Screw - Sauder Heritage Serie Manual De Montaje

12 12
These surfaces should be the same color.
14S

BROWN 1-1/2" FLAT HEAD SCREW

(6 used in this step)
Press a MAGNETIC CATCH (2I) into the large holes of the KEYBOARD SIDES (R and S).
Fasten the KEYBOARD SIDES (R and S) to the KEYBOARD BACK (Q) and then to the KEYBOARD SHELF (T). Use six
BROWN 1-1/2" FLAT HEAD SCREWS (14S).
NOTE: You should start each SCREW a few turns before completely tightening any of them.
402159
R
S
Q
Finished surface
S
www.sauder.com/services
2I
For adjustment turn the barrel
counter-clockwise.
R
T
Long fi nished edge
Page 17