Sauder Heritage Serie Manual De Montaje página 23

18 18
Z
This drawer will be the upper drawer.
This drawer will be the lower drawer.
Fasten an EXTENSION SLIDE (Z) to each LARGE DRAWER SIDE (D244) as shown. Use two GOLD 5/16" FLAT HEAD SCREWS
(3S) through the round holes shown in each EXTENSION SLIDE and into the pre-drilled holes in the LARGE DRAWER SIDES.
Repeat this step for the other large drawers.
Fasten a LOCK BRACKET (9J) to two large drawers exactly as shown. Use a BROWN 7/16" LARGE HEAD SCREW (6S) through
the oblong hole in each LOCK BRACKET and into the exact pre-drilled hole shown in the LARGE DRAWER SIDES (D244).
402159
Open end
D244
D244
9J
Use the slotted hole.
Open end
Z
D244
www.sauder.com/services
Open end
Z
GOLD 5/16" FLAT HEAD SCREW
(12 used for the EXTENSION SLIDES)
BROWN 7/16" LARGE HEAD SCREW
(2 used in this step)
9J
D244
Z
3S
6S
Use the slotted hole.
Open end
Page 23