Sauder Heritage Serie Manual De Montaje página 24

19 19
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
Pull the SMALL DRAWER FRONT BRACKETS (7G) apart and slide them into the grooves in the DRAWER SIDES (D233). You
may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identification.
Fasten the DRAWER FRONT (L) to the SMALL DRAWER FRONT BRACKETS. Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the DRAWER BOTTOM (D883) fi ts into the groove in the DRAWER FRONT.
Repeat this step for the other small drawer.
Page 24
L
1S
www.sauder.com/services
D233
D883
D233
7G
D233
402159