Interfase De Cierre De Interruptores - Lutron RadioRA Guía De Preparación

Retorno de un componente a los ajustes predeterminados en fábrica

Interfase de cierre de interruptores

El retorno de una interfase de cierre de interruptores a los ajustes predeterminados en fábrica borrará
permanentemente toda la programación corriente. No dé este paso sin estar seguro de su necesidad.
Para obtener más información, llame a la Línea Directa de Asistencia Técnica de Lutron.
Paso 1
Inicie el retorno a los ajustes
predeterminados en fábrica
Antes de proseguir, verifique que los LED
ACTIVATE REPEATER o ACTIVATE
CONTROLS NO estén encendidos en ningún
repetidor. Si cualquiera de ellos estuviera
encendido, oprima el botón correspondiente
hasta que se apague (aproximadamente 3
segundos).
Oprima y sostenga los tres botones hasta que
los LED de entrada 1 y 4 y el LED FLASH
comiencen a destellar (aproximadamente 3
segundos).
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
Paso 2
Complete el retorno a los
ajustes predeterminados en
fábrica
Oprima y sostenga los botones Program y
Closure Type hasta que la interfase quede
reposicionada (todos los LED destellarán).
S S C
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
Todos los LED (excepto el de potencia) se
apagarán para indicar que la interfase de
cierre de interruptores ha vuelto a los ajustes
predeterminados en fábrica.
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
Guía de Preparación del Sistema
g g
4-6