Asignación De Atenuadores, Interruptores Y Unidades De Control Grafik Eye A Los Canales De Entrada - Lutron RadioRA Guía De Preparación

Adición de una interfase de cierre de interruptores
Asignación de atenuadores, interruptores y unidades de
control GRAFIK Eye
Programación de la interfase de cierre de interruptores para controlar una luz o grupo de luces a través de un
canal de entrada determinado.
Paso 1
Inicie la asignación de
atenuadores, interruptores y
unidades de control GRAFIK
Eye a los canales de entrada
®
Oprima y sostenga simultáneamente los
botones "Program" e "Input Select", hasta que
el LED Program comience a destellar
(aproximadamente 3 segundos).
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
El LED Program destella. Se encenderán el
LED Input 1 (Entrada 1) y un LED de "Closure
Type" (Tipo de cierre).
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005
Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
3-7
Guía de Preparación del Sistema
a los canales de entrada
®
In ut 5
Program LED LED Program
Paso 2
Seleccione el canal de entrada
que desee programar
Oprima momentáneamente el botón Input
Select hasta que se prenda el LED
correspondiente al canal de entrada deseado.
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005 Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN
El LED del canal de entrada seleccionado
estará encendido.
See the Switch Closure Interface Addendum to the Programming
Guide for operating instructions.
For additional assistance call the Lutron Technical Assistance
Hotline: 1-800-523-9466
FCC ID JPZ0005
Patents Pending
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) This device must accept any
interference received including interference that may cause undesired operation.
18V
AC IN