SKF TLMP 1008 Instrucciones De Montaje página 283

EN
EC Declaration of incorporation following machinery directive 2006/42/EC, annex II, part 1 B
The manufacturer, SKF Maintenance Products, Kelvinbaan 16, 3439 MT Nieuwegein, The Netherlands, hereby declares that the partly completed machinery
Designation: Pump to supply lubricant during intermittent operation within a centralized lubrication system
Type: TLMP 1008/ TLMP 1018
Part number: TLMP 1008/24DC, TLMP 1018/24DC, TLMP 1008/120V, TLMP 1018/120V, TLMP 1008/230V, TLMP 1018/230V
Year of construction: See type identification plate
complies with the following basic safety and health requirements of the EC machinery directive 2006/42/EC at the time when first being launched in the
market.
The special technical documents were prepared following Annex VII part B of this directive. Upon justifiable request, these special technical documents can be
forwarded electronically to the respective national authorities. The person empowered to assemble the technical documentation on behalf of the manufac-
turer is the head of standardization, See manufacturer's address.
Furthermore, the following directives and harmonized standards were applied in the respective applicable areas:
2011/65/EU RoHS II
2014/30/EU Electromagnetic compatibility | Industry
Standard Edition
DIN EN ISO 12100 2011
DIN EN ISO 809 2012
DIN EN 60204-1 2007
Amendment 2010
DIN EN ISO 50581 2013
The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with
the previsions of machinery directive 2006/42/EC and any other applicable directives.
Nieuwegein, 2017/01/02
Sébastien David
Manager Product Development and Quality
Nieuwegein, The Netherlands
SKF Maintenance Products
2
1.1.2, 1.1.3, 1.3.2, 1.3.4, 1.5.1,·1.5.6, 1.5.8, 1.5.9, 1.6.1, 1.7.1, 1.7.3, 1.7.4
Standard Edition
DIN EN 60947-5-1 2010
DIN EN 61131-2 2008
Amendment 2009
DIN EN 60034-1 2011
DIN EN 61000-6-1 2007
Standard Edition
DIN EN 61000-6-2 2006
Amendment 2011
DIN EN 61000-6-3 2011
Amendment 2012
EC Declaration of incorporation
Standard Edition
DIN EN 61000-6-4 2011
DIN EN 60947-5-1 2010