SKF TLMP 1008 Instrucciones De Montaje página 302

3. Overview, functional description
5 Power supply
Serves to connect the pump to an external
power supply.
6 Signal line
Serves to connect the pump to an external
control or signal device.
7 Metering devices
Serve to meter and distribute lubricant as well
as to switch off the pump by means of an indi-
cator pin and proximity switch after reaching
the preset number of operating cycles.
8 Reservoir venting device
Serves to vent the reservoir when filling it
with lubricant or to vent the reservoir during
operation.
13 Emergency lubrication fitting
Serves to provide the connected lubrication
points with lubricant, e.g. in case of a defect of
the pump.
Max
SKF MultiPoint Automatic
Lubricator TLMP series
On
min h
5
6
13
7
EN
Overview Fig. 2
3
8
21