Check Weighing; Switching Off; User Calibration - Soehnle Professional 9202 Instrucciones De Manejo

English
Tare weighing and add-on weighing
0.0
5 28.

Check weighing

3.2
Total weight display
2 3 35

Switching off

0.0
Clear tare

User calibration

1 1 0 0
All manuals and user guides at all-guides.com
Place the container on the base. Press the
Place the weighing goods on the scale.
Add-on weighing: Press the
the additional weighing goods. You can keep doing this up to the maxi-
mum load weight.
Place the reference object on the scale. Tare. Remove the reference
object. Place the object under test on the scale and read off the
plus/minus difference on the display.
When objects are on the scale, press the
Remove the goods for weighing. The total weight appears with a minus
sign.
When the display shows
scale with batteries or rechargeable batteries, the auto-off function is
active. When the display shows
ly after 2 minutes.
When the scale is empty, press the
Switch the scale on. Press the
CAL
until appears in the display.
LOAD
alternates with
Place a 2kg weight on the scale.
After scale standstill, the value is automatically accepted and
flashes alternately with
Place a 5kg weight on the scale.
DONE
After standstill,
The scale is then ready to operate.
key again until
key.
0.0
, press the key. When operating the
0.0
, the scale switches off automatical-
key again.
key for approx. 3 seconds
CAL0
then flashes.
200
.
500
.
is briefly displayed followed by the weight.
0.0
key. is displayed.
0.0
is displayed. Add
0.0
is displayed.
LOAD